Painters Scaffold

We've got quite possibly the most state-of-the-art production gear, experienced and qualified engineers and workers, acknowledged top quality handle systems along with a friendly expert gross sales group pre/after-sales support for Painters Scaffold, 13 Pitch Stainless Prop, Need Concrete Poured, High-Rise Building, Striving hard to attain continual success based on quality, reliability, integrity, and complete understanding of market dynamics. The corporation keeps to the operation concept "scientific management, superior quality and performance primacy, consumer supreme for Painters Scaffold, With high quality, reasonable price, on-time delivery and customized & customized services to help customers achieve their goals successfully, our company has got praise in both domestic and foreign markets. Buyers are welcome to contact us.


  • Wing Nut

    Wing Nut

    The Flanged Wing Nut is available in different diameters. With a larger pedestal, it allows a direct load bearing on walings.
    It can be screwed on or loosened using a hexagon wrench, thread bar or hammer.

  • H20 Timber Beam Wall Formwork

    H20 Timber Beam Wall Formwork

    Wall formwork consists of H20 timber beam, steel walings and other connecting parts. These components can be assembled formwork panels in different widths and heights, depending on the H20 beam length up to 6.0m.

  • Precast Steel Formwork

    Precast Steel Formwork

    Precast girder formwork has advantages of high-precision, simple structure,retractile,easy-demoulding and simple operation. It can be hoisted or dragged to casting site integrally, and demoulded integrally or piecemeal after concrete achieving the strength, then pull out the inner mould from the girder. It is handy installing and debugging, low labor intensity, and high efficient.

  • Tie Rod

    Tie Rod

    Formwork tie rod performs as the most important member in tie rod system, fastening formwork panels. Usually used together with wing nut, waler plate, water stop, etc. Also it is enbeded in concrete used as lost part.

  • Steel Prop

    Steel Prop

    The steel prop is a support device widely used for supporting the vertical direction structure, that adapt to the vertical support of the slab formwork of any shape. It is simple and flexible,and the installation is convenient, being economical and practical. The steel prop takes small space and is easy to store and transport.

  • Tunnel Formwork

    Tunnel Formwork

    Tunnel formwork is a kind of combined type formwork, which combines the formwork of cast-in-place wall and the formwork of cast-in-place floor on the basis of the construction of large formwork, so as to support the formwork once, tie the steel bar once, and pour the wall and formwork into shape once at the same time. Because of the extra shape of this formwork is like a rectangular tunnel, it is called tunnel formwork.

  • Plastic Column Formwork

    Plastic Column Formwork

    By assembling of the three specifications,square column formwork would complete the square column structure in the side length from 200mm to 1000mm atintervals of 50mm

  • Waterproof Board and Rebar Work Trolley

    Waterproof Board and Rebar Work Trolley

    Waterproof board/Rebar work trolley is important processes in tunnel operations. At present, manual work with simple benches is commonly used, with low mechanization and many drawbacks.

  • H20 Timber Beam Column Formwork

    H20 Timber Beam Column Formwork

    The timber beam column formwork is mainly used for casting columns, and its structure and connecting way are quite similar to that of wall formwork.

  • Hydraulic Auto Climbing Formwork

    Hydraulic Auto Climbing Formwork

    The hydraulic auto-climbing formwork system (ACS) is a wall-attached self-climbing formwork system, which is powered by its own hydraulic lifting system. The formwork system (ACS) includes a hydraulic cylinder, an upper and lower commutator, which can switch the lifting power on the main bracket or climbing rail.